[ 0.000000] Linux version 2.6.30-vortex86mx (root@DebianMX) (gcc version 4.3.3 (Debian 4.3.3-10) ) #2 Fri Jun 26 17:32:08 CST 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] CPU: vendor_id 'Vortex86 SoC' unknown, using generic init.
[ 0.000000] CPU: Your system may be unstable.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] DMI not present or invalid.
[ 0.000000] last_pfn = 0x20000 max_arch_pfn = 0x100000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000020000000
[ 0.000000] 0000000000 - 0020000000 page 4k
[ 0.000000] kernel direct mapping tables up to 20000000 @ 7000-8a000
[ 0.000000] RAMDISK: 1fd31000 - 1ffef7ac
[ 0.000000] 512MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 20000000
[ 0.000000] low ram: 0 - 20000000
[ 0.000000] node 0 low ram: 00000000 - 20000000
[ 0.000000] node 0 bootmap 00001000 - 00005000
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0020000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000100000 - 00003c8d18] TEXT DATA BSS ==> [0000100000 - 00003c8d18]
[ 0.000000] #2 [001fd31000 - 001ffef7ac] RAMDISK ==> [001fd31000 - 001ffef7ac]
[ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #4 [00003c9000 - 00003cb000] BRK ==> [00003c9000 - 00003cb000]
[ 0.000000] #5 [0000007000 - 0000085000] PGTABLE ==> [0000007000 - 0000085000]
[ 0.000000] #6 [0000001000 - 0000005000] BOOTMAP ==> [0000001000 - 0000005000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00020000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] On node 0 totalpages: 130975
[ 0.000000] free_area_init_node: node 0, pgdat c0377ea0, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 125984 pages, LIFO batch:31
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:df000000)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129951
[ 0.000000] Kernel command line: root=/dev/hda1 ro quiet
[ 0.000000] Initializing CPU#0
[ 0.000000] NR_IRQS:16
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1000.042 MHz processor.
[ 0.000999] Console: colour VGA 80x25
[ 0.000999] console [tty0] enabled
[ 0.000999] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000999] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000999] Memory: 512980k/524288k available (1819k kernel code, 10676k reserved, 737k data, 192k init, 0k highmem)
[ 0.000999] virtual kernel memory layout:
[ 0.000999] fixmap : 0xfffeb000 - 0xfffff000 ( 80 kB)
[ 0.000999] vmalloc : 0xe0800000 - 0xfffe9000 ( 503 MB)
[ 0.000999] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000999] .init : 0xc0382000 - 0xc03b2000 ( 192 kB)
[ 0.000999] .data : 0xc02c6d1b - 0xc037f3b8 ( 737 kB)
[ 0.000999] .text : 0xc0100000 - 0xc02c6d1b (1819 kB)
[ 0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000999] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.001019] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.08 BogoMIPS (lpj=1000042)
[ 0.001140] Mount-cache hash table entries: 512
[ 0.001782] CPU: Vortex86 SoC 05/08 stepping 06
[ 0.001819] Checking 'hlt' instruction... OK.
[ 0.006495] net_namespace: 968 bytes
[ 0.006917] NET: Registered protocol family 16
[ 0.010429] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=0
[ 0.010455] PCI: Using configuration type 1 for base access
[ 0.020889] bio: create slab <bio-0> at 0
[ 0.023546] PCI: Probing PCI hardware
[ 0.023569] PCI: Probing PCI hardware (bus 00)
[ 0.024236] pci 0000:00:08.0: reg 10 io port: [0xec00-0xecff]
[ 0.024269] pci 0000:00:08.0: reg 14 32bit mmio: [0xfebdb400-0xfebdb4ff]
[ 0.024308] pci 0000:00:08.0: reg 30 32bit mmio: [0xfebc0000-0xfebcffff]
[ 0.024367] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfebd9000-0xfebd9fff]
[ 0.024445] pci 0000:00:0a.1: reg 10 32bit mmio: [0xfebdb800-0xfebdb8ff]
[ 0.024530] pci 0000:00:0b.0: reg 10 32bit mmio: [0xfebda000-0xfebdafff]
[ 0.024625] pci 0000:00:0b.1: reg 10 32bit mmio: [0xfebdbc00-0xfebdbcff]
[ 0.024711] pci 0000:00:0c.0: reg 10 io port: [0xef00-0xef07]
[ 0.024736] pci 0000:00:0c.0: reg 14 io port: [0xee80-0xee83]
[ 0.024760] pci 0000:00:0c.0: reg 18 io port: [0xee00-0xee07]
[ 0.024783] pci 0000:00:0c.0: reg 1c io port: [0xed80-0xed83]
[ 0.024807] pci 0000:00:0c.0: reg 20 io port: [0xed00-0xed0f]
[ 0.024880] pci 0000:00:0d.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff]
[ 0.024908] pci 0000:00:0d.0: reg 14 32bit mmio: [0xfebe0000-0xfebfffff]
[ 0.024934] pci 0000:00:0d.0: reg 18 io port: [0xef80-0xefff]
[ 0.025023] pci 0000:00:0d.0: supports D1 D2
[ 0.025081] pci 0000:00:0e.0: reg 10 32bit mmio: [0xfebdc000-0xfebdffff]
[ 0.029811] pci 0000:00:07.0: default IRQ router [17f3:6036]
[ 0.035687] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.035717] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.035814] NET: Registered protocol family 2
[ 0.035964] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.036578] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.038377] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.039341] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.039361] TCP reno registered
[ 0.039563] NET: Registered protocol family 1
[ 0.039820] Unpacking initramfs...
[ 0.581459] Freeing initrd memory: 2809k freed
[ 0.593451] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.595666] audit: initializing netlink socket (disabled)
[ 0.595733] type=2000 audit(1246643429.594:1): initialized
[ 0.625025] msgmni has been set to 1007
[ 0.626276] alg: No test for stdrng (krng)
[ 0.626396] io scheduler noop registered
[ 0.626416] io scheduler anticipatory registered
[ 0.626431] io scheduler deadline registered
[ 0.627202] io scheduler cfq registered (default)
[ 0.892906] pci 0000:00:0d.0: Boot video device
[ 0.893911] isapnp: Scanning for PnP cards...
[ 1.250031] isapnp: No Plug & Play device found
[ 1.250798] Clocksource tsc unstable (delta = 241931705 ns)
[ 1.743190] Real Time Clock Driver v1.12b
[ 1.743218] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
[ 1.754834] loop: module loaded
[ 1.754857] Uniform Multi-Platform E-IDE driver
[ 1.756105] piix 0000:00:0c.0: IDE controller (0x8086:0x24db rev 0x01)
[ 1.756224] piix 0000:00:0c.0: 100% native mode on irq 11
[ 1.756254] ide0: BM-DMA at 0xed00-0xed07
[ 1.756300] ide1: BM-DMA at 0xed08-0xed0f
[ 1.756337] Probing IDE interface ide0...
[ 2.019901] hda: SD08G RDC SD-IDE HOST CONTROLLER, ATA DISK drive
[ 2.632207] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.632271] hda: host side 80-wire cable detection failed, limiting max speed to UDMA33
[ 2.632294] hda: UDMA/33 mode selected
[ 2.632328] Probing IDE interface ide1...
[ 3.151230] ide0 at 0xef00-0xef07,0xee82 on irq 11
[ 3.151339] ide1 at 0xee00-0xee07,0xed82 on irq 11
[ 3.153698] PNP: No PS/2 controller found. Probing ports directly.
[ 3.157964] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.158009] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.160123] mice: PS/2 mouse device common for all mice
[ 3.162171] input: PC Speaker as /devices/platform/pcspkr/input/input0
[ 3.164316] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 3.165215] NET: Registered protocol family 17
[ 3.168279] Freeing unused kernel memory: 192k freed
[ 4.031598] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input2
[ 5.912602] ide-gd driver 1.18
[ 5.912806] hda: max request size: 128KiB
[ 5.912831] hda: 15954944 sectors (8168 MB) w/0KiB Cache, CHS=15828/16/63
[ 5.913044] hda:<6>usbcore: registered new interface driver usbfs
[ 5.917335] usbcore: registered new interface driver hub
[ 5.917639] usbcore: registered new device driver usb
[ 5.943732] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.975691] ohci_hcd 0000:00:0a.0: OHCI Host Controller
[ 5.976008] ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1
[ 5.976114] ohci_hcd 0000:00:0a.0: irq 4, io mem 0xfebd9000
[ 5.976163] hda1 hda2
[ 5.984860] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.984888] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 6.057592] usb usb1: configuration #1 chosen from 1 choice
[ 6.057929] hub 1-0:1.0: USB hub found
[ 6.058007] hub 1-0:1.0: 2 ports detected
[ 6.059354] ehci_hcd 0000:00:0a.1: EHCI Host Controller
[ 6.059561] ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 2
[ 6.079903] ehci_hcd 0000:00:0a.1: irq 5, io mem 0xfebdb800
[ 6.085832] ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00
[ 6.086582] usb usb2: configuration #1 chosen from 1 choice
[ 6.086904] hub 2-0:1.0: USB hub found
[ 6.086986] hub 2-0:1.0: 2 ports detected
[ 6.088291] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 6.088537] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 3
[ 6.088647] ohci_hcd 0000:00:0b.0: irq 7, io mem 0xfebda000
[ 6.169680] usb usb3: configuration #1 chosen from 1 choice
[ 6.170040] hub 3-0:1.0: USB hub found
[ 6.170125] hub 3-0:1.0: 2 ports detected
[ 6.171433] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 6.171636] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 4
[ 6.192881] ehci_hcd 0000:00:0b.1: irq 9, io mem 0xfebdbc00
[ 6.198878] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
[ 6.199579] usb usb4: configuration #1 chosen from 1 choice
[ 6.199903] hub 4-0:1.0: USB hub found
[ 6.199981] hub 4-0:1.0: 2 ports detected
[ 6.554873] usb 1-1: new low speed USB device using ohci_hcd and address 2
[ 6.695596] usb 1-1: configuration #1 chosen from 1 choice
[ 9.563287] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:0a.0/usb1/1-1/1-1:1.0/input/input3
[ 9.563813] generic-usb 0003:046D:C001.0001: input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:0a.0-1/input0
[ 9.563948] usbcore: registered new interface driver usbhid
[ 9.563974] usbhid: v2.6:USB HID core driver
[ 9.892499] kjournald starting. Commit interval 5 seconds
[ 9.892566] EXT3-fs: mounted filesystem with writeback data mode.
[ 11.559230] udevd version 125 started
[ 14.393112] <6>r6040: RDC R6040 NAPI net driver,version 0.22 (25Mar2009)
[ 19.012511] hda_codec: Unknown model for ALC262, trying auto-probe from BIOS...
[ 19.078100] udev: renamed network interface eth0 to eth1
[ 21.455208] EXT3 FS on hda1, internal journal
[ 22.738928] usbcore: registered new interface driver zd1201
|
